Want to become a forklift trainer?
Competenz certifies and registers all forklift trainers nationally, and maintains a publicly accessible register of all certified forklift trainers within New Zealand — so if you’re interested, speak to us.
We also play a monitoring and support role to all forklift trainers on behalf of WorkSafe NZ, with the aim to maintain and lift safety standards in industry.
We review all applications for anyone in industry wanting to become a registered Forklift Trainer to train employees within their own workplace, or to act as an independent trainer and train employees within multiple companies.
Competenz does not offer training for Forklift Operators Certificates or ‘train the trainer’ qualifications.
Complete the application form at the end of this section, and supply any documentation that may be required.
Email your completed application and all supporting documents to email@example.com
A Competenz appointed forklift auditor will check your application against the criteria given in the Approved Code of Practice for forklift trainers and operators.
If your application is approved, Competenz will contact you to arrange a mutually agreed time for an on-site audit with a Competenz appointed forklift auditor.
The auditor will come to your workplace to:
- Conduct the audit
- Provide feedback to you on your practical teaching and assessment skills (shown at the Forklift Operator course)
- Advise you of the recommendation they’ll make to the National Registrar about your capabilities.
The National Registrar will complete a final evaluation of your application, and advise in writing whether or not you’ve been successful.
If your application has been successful, the National Registrar will:
- Advise on the period of your registration (usually a period of between 1–3 years)
- Register your details on the National Forklift Trainer database
- Invoice your company for the services provided
- Email you a certificate endorsing your registration as a forklift trainer.
If your application has not been successful the National Registrar will advise you why this decision has been reached, along with recommended steps you can take to ensure you’re successful next time you apply.
- For a single, new trainer registration (from one company).
- To register multiple trainers from one company, or
- New trainers intending to use the Competenz-approved training resource package, or
- For renewal of registration.
Charges for the onsite auditor’s travel and accommodation costs apply (POA). A $50+gst booking fee applies to all travel bookings. Any applicable cancellation costs will also be charged.
Competenz has produced resource material packages to support both the training delivery and learning. This saves you the time and expense of creating and maintaining your own quality training resources.
Workbooks also help your trainees toward achievement of three Competenz forklift unit standards.
The new forklift operator training resources assess trainee operators against:
- 10851 – Operate a powered industrial lift truck (forklift)
Competenz has assessment materials only for the following unit standards:
- 10852 – Operate a powered industrial lift truck (forklift) fitted with attachments
- 18409 – Use a forklift mounted safety platform in the workplace
Trainer’s pack - $180+gst
Comes with a professionally printed Trainer’s Guide, Assessment Guide, Workbook, and a USB stick with additional support materials.
Candidate’s pack - $50+gst
Consists of ONLY the Assessment Guide & Workbook for the candidate. (Must be purchased for every candidate).
If you prefer to develop your own learning and assessment material these need to be pre audited and pre moderated by Competenz before they are used. The cost of pre moderation is $75+gst per hour.
NB:- Qualifying as a forklift trainer does not automatically allow you to report unit standards.
What is the ACOP?
This is the Approved Code of Practice which all registered forklift trainers and operators must adhere to. You can read the ACOP here.
What are the 'train the trainer' requirements?
Only instructors who have successfully completed a recognised `train the trainer’ course in instructional techniques, will be considered qualified to provide training, assess operators and to issue certificates.
The adult education skills sets required are outlined in the forklift ACOP.
These skill sets can be evidenced by the following unit standards.
4098 is not a requirement for trainers, only assessors.
NB: If you require an ‘F’ endorsement on your driver’s license, the minimum age for this is 18yrs.
Do I need an ‘F’ endorsement on my driver’s license?
You will need to apply for an F endorsement on your driver’s license if you will be operating a forklift on a road.
There may be some instances where a warehouse environment is classed as a road, if the public can gain access. Please see below the definition of a road.
For queries regarding gaining the F endorsement, please contact MITO (link to: https://www.mito.org.nz/ )
How does the change from Department of Labour to WorkSafe affect training and forklift certification?
- All forklift operators certificates should be referencing WorkSafe, not OSH or DOL.
- Programmes should no longer be referencing OSH - the correct terminology is forklift operators training.
Can a trainer issue an ‘Operate Under Supervision’ certificate?
Operating under supervision – best practice
Under the new H&S Act 2015, section 9 of part 1 outlines the duty of every employer to provide information, supervision and training in uses of plant of any kind.
It is recommended new operators have 15 hours supervised practical experience in the workplace prior to attending a forklift operator's course or can return to the trainer at a later date for further training and a resit opportunity.
Trainers should not be supplying a certificate indicating that the trainee is able to operate under supervision. It is the responsibility of the employer to ensure that any training procedures are documented. The trainee is authorised by the employer on the basis they have been trained and are competent to operate the forklift.
How does the new Health and Safety at Work Act 2015 affect training and forklift certification?
Worksafe New Zealand has provided the following detail regarding the legislation changes to the Health and Safety legislation (Health and Safety at Work Act 2015):
- The current Forklift Code of Practice still applies.
- The relevant regulations will be incorporated into the new regulations, under the Plant and Structures legislation, as part of ‘Phase 2’ of the changes which is likely to happen over the next year or two.
- Current regulations and practices remain in place until these have been reviewed.
If you require further details, you can email the forklift registrar here.
Can I be trained to operate a forklift if I have had no previous experience?
Yes. Most forklift trainers provide good practical lessons in their courses.
How can I find a trainer who offers forklift training?
A list of registered forklift trainers is available on the right hand side of this page.
Can I achieve NZQA unit standards by attending a forklift operator training course?
You can if the trainer is registered with an industry training organisation (ITO) to assess unit standards or is an NZQA accredited provider.
How long should a forklift operator course take to complete?
New operator: This can be up to 2 days. Refresher course: This can be up to 1 day.
How long should a practical forklift assessment take?
- This is separate from the time needed for training
- The practical assessment shall have a minimum duration of 10-15 minutes per trainee. The pre-operational checks and debrief should not form part of that time
Does an F Endorsement on my driver licence qualify me to operate a forklift in a warehouse?
No. The F Endorsement authorises you to drive a forklift on a road.
How often must I renew my forklift operator’s certificate?
Every three years.
How often must I renew my forklift trainers certificate?
Usually every three years.
Do I need a forklift operator certificate to operate a pedestrian operated forklift?
Yes. The ACOP applies to all powered industrial lift trucks.
Do I have to be registered with Competenz to deliver a Department of Labour approved forklift operator course?
Yes. By engaging with Competenz for the registration process you are ensuring that your course and your own performance has been audited against nationally accepted industry criteria and complies with the ACOP.
If my application for forklift trainer registration is not approved am I able to seek a review of the decision?
Yes you may apply in writing to the registrar requesting the decision be reviewed. Click here to email registrar.
If I leave my job as a forklift trainer and move to another employer can I be employed in the same capacity using my existing forklift trainer registration?
No. Your initial registration was awarded on the basis of working for the first employer using course material that was approved for that company. You will need to reapply for registration for the new company and submit course material intended to be used.
Where can I find an example of the syllabus to be taught on a forklift operator course?
Appendix D of the Department of Labour Approved Code of Practice for forklift trainers and operators. You can read the ACOP here.
How often must I attend refresher training?
What is the minimum age for a person to be able gain a forklift operators certificate?
At least 15yrs. The Health and Safety Act 1995 – section 56 states that no employee under the age of 15 can work with any machinery in a place of work.
Specifically section 46 of the Health and Safety at Work (General Risk and Workplace Management) Regulations 2016 states:
Section 46: duty to ensure young persons do not work at or with machinery
(1) A PCBU with management or control of a workplace must ensure, so far as is reasonably practical, that no worker aged under 15 years –
a) Works at or with any machinery at the workplace or
b) Assists with work at or with any machinery at the workplace
(2) In subclause (1) machinery –
a) Means an engine, motor or other appliance that provides mechanical energy derived from compressed air, the combustion of fuel, electricity, gas, gaseous products, steam, water, wind, or any other source and
i) Any plant by or to which the motion of any machinery is transmitted and
ii) A lifting machine, a lifting vehicle, a machine whose motive power is wholly or partly generated by the human body and a tractor.
Is it compulsory to wear a seat belt on a forklift?
If a seat belt is fitted then yes you need to wear it. A seat belt must be worn if the forklift is driven on the road.
Is a Telehandler classed as a forklift?
If the Telehandler has forks attached then yes but there are distinct differences, e.g. load capacity charts which should be covered by the trainer. Forklift operator training courses should use a conventional powered industrial lift truck.
Is an Australian forklift operators certificate valid in New Zealand?
The employer has sole discretion to accept evidence of an Australian qualification. Individual employers may require additional training or a New Zealand forklift operators certification in accordance with organisation policies and procedures.
The position of WorkSafe NZ (formerly Department of Labour) is that where a forklift operator provides a certificate or document that shows that they have received formal training/tuition/instruction/assessment under any of the 7 states and territories of Australia, then NZ employers should recognise this and therefore not preclude the Operator from gaining employment.
In most cases, WorkSafe NZ agrees that “refresher” training at the earliest opportunity would be sufficient to address any of the differences between NZ and Australia.
What is the maximum size of forklift that can be operated?
There are no guidelines in terms of classification however Industry has adopted the following in terms of sizes a forklift operator may use.
- Forklift weighing 18000kg or less (with a load), Class 1 licence and F endorsement.
- Forklift weighing 18001kg or more (with a load), Class 2 license and F endorsement.
What is the definition of a road?
Definition of a road (Land Transport Act 1998)
a) A street and
b) A motorway and
c) A beach and
d) A place to which the public have access, whether as a right or not and
e) All bridges, culverts, ferries and fords forming part of a road or street or motorway and
f) All sites at which vehicles may be weighed for the purposes of the act or any other enactment.